Where to get a startup map for a built K24?
Posted: Wed Jun 08, 2011 5:06 pm
I'm hopefully finishing the assembly on my Ariel Atom driveline in the next few weeks, and am looking for a Kpro map to get me started on a breakin without washing down the rings.
My setup is:
ERL 12.5:1 K24A2 87.5x99
Team4Piston K20A2 head, flows 360cfm in my cam lift
Kelford Cs (very similar to a Drag Cartel 4, but slightly less duration)
RRC with a 74mm HR TB, and port matched to my head
4:2:1 header to a custom exhaust, no cat
Anyone have a similar setup that might be willing to help a guy new to Hondas out? I don't want or need WOT or high RPM tables, just low cam low RPM stuff.
Thanks,
Jason
My setup is:
ERL 12.5:1 K24A2 87.5x99
Team4Piston K20A2 head, flows 360cfm in my cam lift
Kelford Cs (very similar to a Drag Cartel 4, but slightly less duration)
RRC with a 74mm HR TB, and port matched to my head
4:2:1 header to a custom exhaust, no cat
Anyone have a similar setup that might be willing to help a guy new to Hondas out? I don't want or need WOT or high RPM tables, just low cam low RPM stuff.
Thanks,
Jason