Problem with KPRO PRB in a 2002 civic si ep3
Posted: Thu Jun 02, 2011 8:55 pm
When posting a KPro problem with your vehicle, please include:
- serial number of your K-Pro - i am not sure the serial # but when i open the unit i see a sticker 0500029 on the hondata kpro chip
- KManager version (not 'the latest')
- the calibration (as an attachment)
- a datalog of a problem (as an attachment)
- what sort of vehicle you have
- what sort of ECU you are using
- anything about the car which has been modified from stock which may affect the ECU (don't include what sort of rims you have nor stereo etc).
- a specific description of the problem
-i am not sure the serial # but when i open the unit i see a sticker 0500029 on the hondata kpro chip
-KManager is 1.4.1.0
-Calibration is the STOCK 2002 honda civic si factory tune
-Datalog does not work
-2002 honda civic si hatchback 5psd only modification power wise is aem sri v2
-ECU i am using is a 37820-PRB-A05 and under the serial it says 2068-500342
I have cleared dtc and clear the security files.....and have uploaded the stock kal and same problem....but with my friends kpro same map same everything and its perfectly fine
The problem is that when i turn on my car using the factory tune it idles like crap and i get the check engine light. Now i looked at the data error and the datalog screen and it shows NOTHING only thing i can see is map and iat i think and thats it the rest are blank! no rpm no injec duty cycle what so ever but the thing is i can upload and erase maps and start up my car its just that it runs like CRAP. I have tried my friends KPRO PRB ecu and it starts up fine with the same factory kal and it runs perfectly fine its just mine......i am thinking its ecu? and not the board but i am not expert please hondata help me out here if it were the ecu how much would it cost to transfer my daughterboard to another ecu? i have another spare prb-a03. please and thank you....
Engine is a STOCK K20a3 5spd with a SRI aem v2
- serial number of your K-Pro - i am not sure the serial # but when i open the unit i see a sticker 0500029 on the hondata kpro chip
- KManager version (not 'the latest')
- the calibration (as an attachment)
- a datalog of a problem (as an attachment)
- what sort of vehicle you have
- what sort of ECU you are using
- anything about the car which has been modified from stock which may affect the ECU (don't include what sort of rims you have nor stereo etc).
- a specific description of the problem
-i am not sure the serial # but when i open the unit i see a sticker 0500029 on the hondata kpro chip
-KManager is 1.4.1.0
-Calibration is the STOCK 2002 honda civic si factory tune
-Datalog does not work
-2002 honda civic si hatchback 5psd only modification power wise is aem sri v2
-ECU i am using is a 37820-PRB-A05 and under the serial it says 2068-500342
I have cleared dtc and clear the security files.....and have uploaded the stock kal and same problem....but with my friends kpro same map same everything and its perfectly fine
The problem is that when i turn on my car using the factory tune it idles like crap and i get the check engine light. Now i looked at the data error and the datalog screen and it shows NOTHING only thing i can see is map and iat i think and thats it the rest are blank! no rpm no injec duty cycle what so ever but the thing is i can upload and erase maps and start up my car its just that it runs like CRAP. I have tried my friends KPRO PRB ecu and it starts up fine with the same factory kal and it runs perfectly fine its just mine......i am thinking its ecu? and not the board but i am not expert please hondata help me out here if it were the ecu how much would it cost to transfer my daughterboard to another ecu? i have another spare prb-a03. please and thank you....
Engine is a STOCK K20a3 5spd with a SRI aem v2