Hondata

Here is what is done to the engine. Looking for a good basemap to use on my combo:

Engine:
B16A2 (PR3) pistons, 81.5 mm
Block decked .006
Stock rods/ARP bolts, stock crank
GSR head, lightly ported
Skunk2 valves (stock size), valve springs, retainers
Skunk2 Tuner 2 cams
Will be running OBD2 Prelude injectors (290 cc at 43.5 psi, may turn pressure to 50 psi to yield 310 cc)
Skunk2 intake manifold
HyTech large tube replica header
Yonaka 2.3" cat back exhaust
Samco intake arm, K&N Integra filter, CompTech icebox

Trans:
4.785 ITR 1-4, LS 5th

Any other information needed, let me know.