Page 1 of 1
s300 has red led
Posted: Tue May 24, 2011 10:19 pm
by turboacurab20
i plug in the ecu and it lights up red and only flases green for a breif second when uploading calibration and stays red the car will start sometimes run like crap and then stall out i think i need to reset the ecu or something with my other s300 ecu car runs great on same calibration so i must have a junk s300 is there any way to get the ecu reset or maybe im just doing some thing wrong thanks for any help
Re: s300 has red led
Posted: Wed May 25, 2011 12:49 am
by lowblow
At online, don't datalog, upload different calibration. If led turns green then re upload your current calibration..
Re: s300 has red led
Posted: Wed May 25, 2011 5:26 am
by TheWickedOne1
lowblow wrote:At online, don't datalog, upload different calibration. If led turns green then re upload your current calibration..
or try another ECU thats already been prepped.
Re: s300 has red led
Posted: Wed May 25, 2011 9:33 am
by Spunkster
From Help, About, what version of software are you using?