Wiring an 02-04 K-pro to a K20A/K20Z3 chassis harness
Posted: Tue May 03, 2011 10:42 am
Hi-
First post here. I am building an Ariel Atom as follows:
2011 Ariel Atom rolling chassis
K24A2 shortblock built by ERL
K20A2 head CNCed by Team4Piston
74 MM HR TB on an RRC intake
I'll be running a brand new K20A2 harness (32110-PRB-A00), and already have my K-pro - PRB-A05, Serial Number 9221.
A few questions-
Does anyone make a conversion harness to plug the PRB ECU and harness into the body harness for a K20Z3? See below for the plugs I need to connect to.
If not, does anyone have a pinout of the ECU and engine harnesses that I'll need to splice into the Z3 plugs? I believe it's the C and E101 plugs. Anyone know where I can source the C and E101 plugs?
Thanks,
Jason
First post here. I am building an Ariel Atom as follows:
2011 Ariel Atom rolling chassis
K24A2 shortblock built by ERL
K20A2 head CNCed by Team4Piston
74 MM HR TB on an RRC intake
I'll be running a brand new K20A2 harness (32110-PRB-A00), and already have my K-pro - PRB-A05, Serial Number 9221.
A few questions-
Does anyone make a conversion harness to plug the PRB ECU and harness into the body harness for a K20Z3? See below for the plugs I need to connect to.
If not, does anyone have a pinout of the ECU and engine harnesses that I'll need to splice into the Z3 plugs? I believe it's the C and E101 plugs. Anyone know where I can source the C and E101 plugs?
Thanks,
Jason