Page 1 of 1
Quick question about highest rpm in fuel tables...
Posted: Sun Mar 20, 2011 4:16 pm
by Axix23
Lets say your rpms go up to 8500rpms on your fuel tables in your kal.. And you set the rev-limiter up to 8600rpm.. Does the ecu stop reading the fuel tables and doesn't add any fuel above 8500rpms or does it still read from the values of the last line which is the 8500rpm fuel line values?
Thanks...
Posted: Mon Mar 21, 2011 9:32 am
by Hondata
It will continue to use the highest value.
Posted: Mon Mar 21, 2011 11:08 am
by Spunkster
You can edit the RPM index.
Posted: Mon Mar 21, 2011 2:45 pm
by Axix23
Hondata wrote:It will continue to use the highest value.
ok, thanks..
Is there anyway to add an additional rpm line without changing any of the other fuel cells? I know you can delete and edit... But there isn't an option for add... :(
Posted: Mon Mar 21, 2011 3:45 pm
by Spunkster
no
Posted: Mon Mar 21, 2011 5:25 pm
by Axix23
ok, thanks.
Posted: Tue Mar 22, 2011 9:09 am
by Hondata
Right click and select 'add rpm index' will add an index and shuffle all the fuel/ignition values around so that you don't need to change them.