Page 1 of 1
Decrease INJ below Red...(10.00)
Posted: Mon Feb 21, 2011 2:48 am
by kornshadow097
Anyone Know how to decrease the INJ phase? Is it just increasing fuel in the duty?
Or is there another method?
Posted: Mon Feb 21, 2011 10:50 am
by Spunkster
You are going to have to be much more spcific as I don't understand your question.
Posted: Mon Feb 21, 2011 12:39 pm
by kornshadow097
In the k pro software for my data logs, I get my INJ value above 10(ms) and it turns red which I assume is bad.
My question is how do I lower the inj phase duration?
Posted: Mon Feb 21, 2011 12:59 pm
by Spunkster
That is a display setting you can set it to whatever color or setting you want.
If you are maxing out your injectors then you need larger injectors.
Posted: Mon Feb 21, 2011 7:17 pm
by kornshadow097
I read under the help menu on the k-pro software it says I only need larger injectors if the duty is close to 100% and so far I barely hit like 70%. the INJ (ms) is the one turning red..im guessing its a bad thing?... or is it not?
Posted: Tue Feb 22, 2011 10:40 am
by Spunkster
Don't worry about the color. It is something that you can set to whatever you want.
Posted: Fri Feb 25, 2011 1:15 am
by kornshadow097
Alright, I'll just ignore the Red numbers then.
Thanks