Hondata

jdm b16a stock , in an ek swap, fpr 34 psi, 180 psi compression across the board

runs rich all the time, check and can't find any leaks attaced is map and data log hondata s300 with plx wide band

i have cut 20% of the fuel and still runs rich

Use a different input for the wideband such as the ELD input.

eld 10 is the wide band

aavery wrote:eld 10 is the wide band

in your calibration it isn't.

change it and do another datalog.

best regards Lukas

thanks works perfect now, i am guessing that the two signals were conflicting :D