Hondata

My car is a 155HP civic FD2 auto Asia. Software latest beta + latest Flashpro firmware.

Registered flashpro, locked and flashed the base map into ECU, datalogging, tuning with laptop works fine.

But I cannot do standalone datalogging with the Flashpro unit alone. When I pressed the datalog button, nothing happens. Tried returning to stock and unlock/relock with no luck.

There is nothing wrong with the button as I can program the secondary into the ECU with Flashpro alone.

unplug everything, turn the key off and reboot the laptop, then try again.

Spunkster wrote:unplug everything, turn the key off and reboot the laptop, then try again.

as stated in the previous post. Data logging with laptop works but not working with just the flashpro.

I hit the datalog button on the flashpro without usb connected nothing happens.

How many datalogs do you have stored on the FlashPro and what is their total size?

Spunkster wrote:How many datalogs do you have stored on the FlashPro and what is their total size?

I just updated FlashPro Manager to the new version and updated the Flashpro firmware. But still nothing happens when I press the Datalog button with just the FlashPro connected to the car's OBD2 port.

I haven't store any datalogs on the FlashPro because it's not working ever since I got it new. Here is the screenshot of it uploaded to the post.

Please go to Help, and click on "send information to Hondata support". Make sure that you include a detailed description of the problem you are having.

Spunkster wrote:Please go to Help, and click on "send information to Hondata support". Make sure that you include a detailed description of the problem you are having.

Done.. Thanks..

Did this ever get resolved? I am having this same issue.

This is a post from 9 years ago, please start your own thread and give complete details.