Page 1 of 1

s200 launch control

Posted: Mon Sep 13, 2010 6:48 pm
by fry
I called hondata today, my launch control isn't working and all the options short of g sensor are enabled. when i open re4 and datalog and go to the launch control option, everything is greyed out, BUT it shows the RPM I have the launch control set to. I set my shift light just fine, but my launch control is not working. when I open up to see my sensor readings and push in the clutch, it see's that the switch is on. any help would be appreciated.

Posted: Tue Sep 14, 2010 10:42 am
by Spunkster
Post your calibration and a datalog showing the problem.

Posted: Tue Sep 14, 2010 3:53 pm
by fry
Image

Image

Posted: Tue Sep 14, 2010 4:35 pm
by Spunkster
don't post screenshots. You must post the calibration you are using and a datalog showing the problem.

Posted: Tue Sep 14, 2010 6:51 pm
by fry
Spunkster wrote:don't post screenshots. You must post the calibration you are using and a datalog showing the problem.
i dont know what that is