Trying to install drivers, and get D2XX recovery PID

K-Series Programmable ECU installation questions / support issues
Post Reply
hondadummy
Posts: 4
Joined: Sat Sep 04, 2010 6:01 pm

Trying to install drivers, and get D2XX recovery PID

Post by hondadummy »

i have been trying like crazy to get this sorted out, nothing seems to get it to work, i have tried unistalling and the reinstalling kmanager, i have tried different computers, different usb cables...nothing seems to work....any help will greatly be appreciated.
User avatar
Spunkster
Site Admin
Posts: 23887
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

What shows up in the Windows Device Manager when you plug the USB cable into the K-Pro?
hondadummy
Posts: 4
Joined: Sat Sep 04, 2010 6:01 pm

Post by hondadummy »

D2XX recovery PID
hondadummy
Posts: 4
Joined: Sat Sep 04, 2010 6:01 pm

Post by hondadummy »

any suggestions???
User avatar
Spunkster
Site Admin
Posts: 23887
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

I believe you have already been given an RMA number for this...correct?
hondadummy
Posts: 4
Joined: Sat Sep 04, 2010 6:01 pm

Post by hondadummy »

incorrect
User avatar
Spunkster
Site Admin
Posts: 23887
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

Have you sent us an email? What is the K-Pro serial number from inside the ECU?

Try downloading the most recent beta version of the software from our website and then go to HElp, and click on Test USB and follow the instructions.
Post Reply