Page 1 of 1
Live Tuning Error w/ Flashpro Manager v1.1.6.2
Posted: Sun Aug 22, 2010 3:53 pm
by Pir8pete
I have an issue where in using firmware version 22 I can not select any Live tuning tables. And yes I know it's not hooked up the unit at the time of the screen shot.
Posted: Mon Aug 23, 2010 3:56 pm
by Spunkster
The proper firmware version for that version of software is 23. Redownload and install the beta version of software from our website.
Posted: Sat Aug 28, 2010 7:52 am
by soxfan143
That happens to me all the time. Go into the calibration window and click the little live tuning box on the injector latency window and then go back to that live tuning window. All the live tuning boxes should come back
Posted: Wed Sep 01, 2010 11:58 am
by Pir8pete
Spunkster wrote:The proper firmware version for that version of software is 23. Redownload and install the beta version of software from our website.
even happens on 23
Posted: Wed Sep 01, 2010 11:59 am
by Pir8pete
soxfan143 wrote:That happens to me all the time. Go into the calibration window and click the little live tuning box on the injector latency window and then go back to that live tuning window. All the live tuning boxes should come back
I'll give this a try next time it happens, thx
Posted: Tue Sep 07, 2010 5:01 pm
by mucter
This will happen if you connect the FP to the computer with a different USB port than was originally used when you flashed live tuning to the car.