Page 1 of 1

Kpro not conecting. Kpro board burt.

Posted: Mon Jun 07, 2010 3:57 pm
by Jdm90cb7
Ok so I picked up a Kpro installed PNF ecu. Recieved it in the mail and looked it over only to discover that the Kpro board on the inside has a burnt spot on it. Wanting to know what fix there is for this, if any. Thanks.
Image
Image
Image
Image

Posted: Mon Jun 07, 2010 4:02 pm
by Spunkster
More than likely the ECU and K-pro are both damaged and need to be replaced. I would suggest trying to get your money back from the seller.

Posted: Mon Jun 07, 2010 4:03 pm
by Jdm90cb7
Spunkster wrote:More than likely the ECU and K-pro are both damaged and need to be replaced. I would suggest trying to get your money back from the seller.
Im working on that. He claims he has spent the money that I sent him. I opened a dispute with paypal.

Posted: Tue Jun 08, 2010 3:57 pm
by jdmish
this why i don't buy online, you never know what you are going to get. sometimes you buy someone elses headache. good luck bro
i bought an AEM EMS off clubrsx a while back and same thing happen the ecu is fried. paypal would do crap lost 1000. AEM was generous enough to repair it.

Posted: Tue Jun 08, 2010 4:16 pm
by Jdm90cb7
jdmish wrote:this why i don't buy online, you never know what you are going to get. sometimes you buy someone elses headache. good luck bro
i bought an AEM EMS off clubrsx a while back and same thing happen the ecu is fried. paypal would do crap lost 1000. AEM was generous enough to repair it.
Would Hondata repair it if I sent to them?

Posted: Tue Jun 08, 2010 4:36 pm
by Spunkster
You are looking at a $100 diagnostic fee, then there is a high probablility that the ECU is damaged, so you will have to provide a new ECU, then it is $250 for a new K-Pro board, and $150 to have it installed into the new ECU. Total $500. Which is why you might want to try to get your money back.

Posted: Tue Jun 08, 2010 4:45 pm
by Jdm90cb7
Spunkster wrote:You are looking at a $100 diagnostic fee, then there is a high probablility that the ECU is damaged, so you will have to provide a new ECU, then it is $250 for a new K-Pro board, and $150 to have it installed into the new ECU. Total $500. Which is why you might want to try to get your money back.
Gotcha.. What if I sent the burnt ECU/Kpro to you with another PNF ECU. How much for Kpro to just be installed on the ECU? No Diagnostics?

Posted: Wed Jun 09, 2010 9:16 am
by Spunkster
We have to do diagnostics.