Page 1 of 1

Fuel map problem with last version

Posted: Wed May 12, 2010 4:08 am
by Garrett_si
Saturday I had to tune a S2000 2001 comptech supercharged

750 cc injectors
255 lph fuel pump
Hondata s2000 kpro
watercooled system

I resized the injectors, and want to adjust the fuel map tables, it has no effect

I made an overall fuel trim to adjust it, the part throttle and idle were correct

but when at WOT the 4000-6000 rpm power band was lean, I tried a lot of adjustement in the fuel map, without any effect

I erase the ECU 2 times, and rewrite

I use an old version 1.3.7.0, and I was able to tune the car completly

I attach the cal, and the datalog when it was lean. the wideband used is a PLX M200 wiring to the ELD pin

the car is fully tuned, and everything is fine for me, but the last version don't work on this car

Posted: Wed May 12, 2010 11:17 am
by Spunkster
You have lower values in the high cam than you do the low cam at your vtec transition.

Posted: Wed May 12, 2010 3:06 pm
by Garrett_si
Spunkster wrote:You have lower values in the high cam than you do the low cam at your vtec transition.
there is something weird

I opened map create with 1.4.0, that I set the fuel value in vtec map to 20000

and now the values aren't the same that I set saturday

really weird