Page 1 of 1
dyno tuned k20z1 !VIDEO!
Posted: Wed May 05, 2010 5:05 pm
by Cha27se
i got tired of asking people to help me, so i got dyno tuned today. made 215whp 156ft lb, figured id share the wealth.....injen cai, rbc, img, obx v3 race header, magnaflow catback....dynojet. let me know if people like it
Posted: Wed May 05, 2010 9:45 pm
by keto06
From the look of that kal, I helped a bunch.
Posted: Wed May 05, 2010 9:50 pm
by Cha27se
yea you did man, the base kal made 206hp. the tuner said he had his work cut out for him. thanks again for the pre tune. i just felt like a nuisance asking you for updates all the time. i really appreciate the help though, you saved me about a hundred bucks in less dyno time
Posted: Wed May 05, 2010 10:02 pm
by keto06
youre welcome.
Posted: Thu May 06, 2010 11:01 am
by Cha27se
Posted: Thu May 06, 2010 11:59 am
by keto06
Sounds good... No graph?
did he try any different cam angles or did the ones I sent you work best?
I hope you didnt pay much for that tune....
Posted: Thu May 06, 2010 2:38 pm
by Cha27se
i dont think he really messed with much but a little timing and cleaned up the lean spots. He did prob 15-20 pulls and it took about 3 hours. Their price is 150 per hour and he only charged me 200. Im happy with it for the most part. He said he would touch up the tune for free when i get rdx injectors
Re: dyno tuned k20z1 !VIDEO!
Posted: Sun May 16, 2010 12:11 pm
by antedc5-s
i have similar mods on my 06 type s. i will post a datalog later, forgot to run open loop on the first datalog( so its worthless right?) anyone here to help me out and make changes to the map?
Posted: Sun May 16, 2010 2:44 pm
by Kam
i'm going to try this out tonight.
Re: dyno tuned k20z1 !VIDEO!
Posted: Sun May 16, 2010 9:00 pm
by antedc5-s
heres my datalog using chases dyno tune kal
my mods are sri,rbc,img,j's raceheader,fujitsubo powergetter
Re: dyno tuned k20z1 !VIDEO!
Posted: Wed May 19, 2010 6:54 pm
by hdragster
antedc5-s wrote:heres my datalog using chases dyno tune kal
my mods are sri,rbc,img,j's raceheader,fujitsubo powergetter
Make a 4th gear pull with a datalog from 300rpm to redline. This datalog looks like your just going through 1st gear to 4th gear from 1000rpm to 3000rpm. It won't make a difference unless you do a full throttle 4th gear pull to see your airfuel.
Re: dyno tuned k20z1 !VIDEO!
Posted: Thu May 20, 2010 12:17 am
by antedc5-s
Make a 4th gear pull with a datalog from 300rpm to redline. This datalog looks like your just going through 1st gear to 4th gear from 1000rpm to 3000rpm. It won't make a difference unless you do a full throttle 4th gear pull to see your airfuel.[/quote]
in that log i had 1 3rd gear pull from 1500~ - bounce off the 8600 rev limit
but i'll get another log posted. i gotta find the road for a forth gear pull first tho. thank you for the reply
anthony
Re: dyno tuned k20z1 !VIDEO!
Posted: Fri May 21, 2010 1:39 am
by antedc5-s
first pull is 4th gear second is 3rd