Page 1 of 1

stall/idle issue

Posted: Thu Apr 15, 2010 4:05 pm
by kateglsvtec
when my car gets to temp (around 170-and up and the fan is on) and im coming to a stop have the clutch in an my foot on the brake the car will just stall then when u start it back up it doesnt want to idle but sometimes it will.....any help would be great thanks

p.s i have searched and read threw all of the help section on idle and many other and i have adjusted everything i can find with idle it just seems to do it when theres alot of vac pull... on brakes in neutral coasting to a stop it dies

ls/vtec
s300
toda b cams
bisimoto header
itr intake manifold

Posted: Fri Apr 16, 2010 10:11 am
by Spunkster
Do you have a aftermarket flywheel?

Posted: Fri Apr 16, 2010 11:03 am
by kateglsvtec
Spunkster wrote:Do you have a aftermarket flywheel?
yes i do sir.....i read that on here somewhere that people were having issue with that any ideas of how to fix?

Posted: Fri Apr 16, 2010 11:51 am
by Spunkster
you can try to move the slider to the rigght in the idle parameters, but that may not solve the problem. THe problem is not enough inertia to keep the engine turning.

Posted: Fri Apr 16, 2010 11:54 am
by kateglsvtec
Spunkster wrote:you can try to move the slider to the rigght in the idle parameters, but that may not solve the problem. THe problem is not enough inertia to keep the engine turning.

yeah i have tried that not all the way to the right tho ill give it a shot.....any other ways to maybe fix it....thanks

Posted: Mon Apr 26, 2010 7:12 am
by bryant
i'm having the same problem. is there any other way to fix this?

Posted: Tue Apr 27, 2010 10:48 am
by bryant
anyone?