Page 1 of 2
FlashPro and oil sensor
Posted: Sun Mar 21, 2010 4:37 am
by Mityai
After installing FlashPro disappeared from the dashboard oil pressure lamp!
Tell me - how can I make it work?
Posted: Sun Mar 21, 2010 7:48 am
by Hondata
Oil pressure or oil level? With the AFM or race calibration?
Posted: Sun Mar 21, 2010 9:10 am
by Mityai
the red indicator on the dashboard.
no lights!
Posted: Mon Mar 22, 2010 4:53 am
by Mityai
we have MAP-based race calibration
oil pressure lamp doesnot work at all
Posted: Mon Mar 22, 2010 7:48 am
by Hondata
What is your ECU part number? (37820-xxx-xxxx)
Posted: Sat Mar 27, 2010 8:12 am
by Mityai
ECU 37820-RSP-E02
Posted: Mon Apr 05, 2010 10:29 am
by Hondata
Oil pressure or oil level?
The oil level warning is not going to work with the race calibration. The oil pressure warning should.
Posted: Tue Apr 06, 2010 5:19 am
by Mityai
unfortunately, oil pressure does not work
we've checked all MAP calibrations attached with Flashmanager, and the same result.
No oil pressure lamp at all
Posted: Tue Apr 06, 2010 7:29 am
by Hondata
Can you access a wiring diagram for your vehicle and determine the pin used for the oil pressure input?
Posted: Thu Apr 08, 2010 11:04 am
by Mityai
B7 pin, the same as on US Si civics
Posted: Thu Apr 08, 2010 11:17 am
by Spunkster
What has been modified on your Civic?
Posted: Thu Apr 08, 2010 10:55 pm
by Mityai
Spunkster wrote:What has been modified on your Civic?
Nothing, only JR and FlashPro!
http://www.drive2.ru/cars/honda/civic_t ... 888287741/
Posted: Fri Apr 09, 2010 4:15 pm
by Spunkster
Have you checked continuity form the oil pressure sensor to the ECU pin?
Posted: Fri Apr 09, 2010 9:37 pm
by Mityai
We tried to load back to the standard firmware fn2, oil pressure lamp works!
Posted: Sat Apr 17, 2010 9:24 am
by gasss_85
Is the oil level warning going to work with the MAF calibration????
Is the oil pressure warning going to work with the MAF calibration????