sorry if repetative k20z1 help

sictegboi3 · Post by **sictegboi3** » Wed Jan 27, 2010 11:42 pm

ive searched alot and everyone on here in the diff threads ive read have been hella nice and helpful with helping others..so i thought since im stuck someone can help me? i have a k20z1 in my dc2-rbc/img/r crew race header/3in straight through/cai. ive surched and havent found any with a 3in ex. the stock ctr cal wasnt nearly as good as when i was running the mobbilizer before i had k pro, so if someone has a cal with about the same mods can you please help? i need to have my car running right for a few weeks until i can go get tuned. Again big ups to everone on attitude and the help-makes you feel like your not even driving a honda no more lol

keto06 · Post by **keto06** » Thu Jan 28, 2010 2:23 pm

Load up my calibration, start the datalogger on your laptop, and go out for a drive. Make sure to include some part throttle daily type driving and some idle time (at a stoplight or something)

Then make sure and do 2-3 3rd gear pulls from 2k-redline.

Dont shift from 2nd-3rd and punch it. Put it in 3rd, let the RPMs fall down, then punch it, full throttle, till redline. You can either let off or shift to 4th. That’s up to you.

Save the datalogs as like Pull1, pull2 etc and send them back to me.

sictegboi3 · Post by **sictegboi3** » Sat Jan 30, 2010 12:59 am

Im not going to be able to do the datalog until Tues. When I datalog, it doesnt matter the length of the driving? Or just start recording a little before i do the pulls? Again thanks again in advanced!! Ill get it up soon. Oh yea I have a C.C 6 puck w/ ulf as well if that means little to none.

sictegboi3 · Post by **sictegboi3** » Tue Feb 02, 2010 12:56 pm

heres a 2nd to 3rd, 3rd to 4th pull. This is my first time uploading a cal so let me know if it dont work. again the mods i have : k20z1-cai/r-crew rh/3in manderal bend all the way, no cat/rbc/hondata img/cc 6puck sprung w/ ulf. Again I appreciate your help!!

cranny · Post by **cranny** » Sun Feb 07, 2010 10:44 pm

that datalog is kinda useless.

you need to get the car in 3rd gear , 4th if theres a place you can safely do it , lol , at 2000rpm. instantly floor it , dont roll on the throttle. dont let off a bit till redline.

sictegboi3 · Post by **sictegboi3** » Mon Feb 08, 2010 2:52 pm

ok...ima redo it tonight then