Page 1 of 1
Stock calibration?
Posted: Thu Dec 10, 2009 9:11 am
by vkendea
Hello to everybody, I am a new user of Hondata Flashpro!
I was wondering how I can download the existing stock calibration from the ECU to my laptop, so I can be able to restore it at any time.
Is this possible?
Posted: Thu Dec 10, 2009 9:17 am
by XSRCivic
When you unlock the FlashPro from the ECU it restores the original ECU calibration.
You cannot save your original calibration with FlashPro.
Posted: Thu Dec 10, 2009 10:20 am
by Gernby
Are you sure that unlocking the FlashPro restores the "original" calibration? That would be nice, but I thought it would simply apply the FlashPro's "Stock Equivalent" calibration.
Posted: Thu Dec 10, 2009 10:53 am
by Spunkster
WHen you click on "New Calibration" you will see the option for return to stock. That is the stock calibration.
Posted: Fri Dec 11, 2009 4:10 am
by vkendea
Thank you, that was clear!
There is a misunderstanding with the .fpcal filenames for FN2...
So, Civic-Si-RSP-9-RTS.fpcal is the stock calibration of the FN2 or is equivalent to stock and maybe they are some deference with them?
Posted: Fri Dec 11, 2009 10:38 am
by Hondata
Return to stock = stock calibration, factory calibration.
Stock equivalent = just that
Posted: Fri Dec 11, 2009 1:31 pm
by jeremy0203
Hondata wrote:Return to stock = stock calibration, factory calibration.
Stock equivalent = just that
why are the CVN's of your guys' stock calibrations different than hondas then? That means yours arent exactly the same, which also means it is detectable by honda.