2006 K24a2 in '02 RSX Type-S

K-Series Programmable ECU Calibration updates / downloads
Locked
defzer0
Posts: 2
Joined: Thu Nov 05, 2009 8:02 am
Location: Cincinnati, OH

2006 K24a2 in '02 RSX Type-S

Post by defzer0 »

Hello,

I just recently swapped in a K24a2 from a 2006 TSX into my 2002 RSX Type-S. I was given a tune by a friend of mine and on start up seems to be running fine, and all of a sudden the idle starts jumping up and down from 1k to 2k rpm. It will do it for a few seconds, and idle normally.. then it'll start again after a minute or two.


Wondering if there was a better calibration I could use with this setup:

-2006 k24a2
-RBC IM w/ karcepts adapter
-Fujita F5 cold air
-DC stainless header
-2005-06 RSX-S exhaust

Any help is appreciated.
You do not have the required permissions to view the files attached to this post.
keto06
Posts: 507
Joined: Fri Jul 17, 2009 9:29 pm

Post by keto06 »

Either your o2 isn't working, or you are super lean.

And those cam angles arent the best.

Either try using a modified version of the 0405TSX kal or get it tuned.

Or pm me.
defzer0
Posts: 2
Joined: Thu Nov 05, 2009 8:02 am
Location: Cincinnati, OH

Post by defzer0 »

keto06 wrote:Either your o2 isn't working, or you are super lean.

And those cam angles arent the best.

Either try using a modified version of the 0405TSX kal or get it tuned.

Or pm me.
Won't let me PM on here. Are you on ClubRSX. I'm going to PM you from there.
Thanks!
keto06
Posts: 507
Joined: Fri Jul 17, 2009 9:29 pm

Post by keto06 »

yep same name there
Locked