Page 1 of 1
Speed Adjustment Parameter = No Cruise Control
Posted: Thu Oct 22, 2009 2:55 pm
by Bboy_Burst
When I use the Speed Adjustment option, my Cruise Control doesn't work anymore. The power "Cruise Main" light still comes on, but the the one right under it doesn't come on when I set it. If I leave that option alone or return the car back to Stock, the Cruise Control will work again.
I have a Final Drive and need my Speedometer to work correctly. Perhaps, this is a bug in the program?
Posted: Thu Oct 22, 2009 3:31 pm
by all-black
hey man whats up nice to finnaly see u on here.
Posted: Fri Oct 23, 2009 8:43 am
by Hondata
Who much are you adjusting the speedo by? If the ECU detects clutch slippage from the speed/rpm to gear calculation it will cancel the cruise control.
Posted: Fri Oct 23, 2009 4:46 pm
by Bboy_Burst
Hondata wrote:Who much are you adjusting the speedo by? If the ECU detects clutch slippage from the speed/rpm to gear calculation it will cancel the cruise control.
Speed Adjustment (ECU) = -7%
Speed Adjustment (DASH) = -10%
With this setting, all 3 (VSS, DASH, Speed Radar) are the same.
I've tried this on previous version of FlashPro & the most current one and still no luck.
Posted: Sat Oct 24, 2009 3:28 pm
by Hondata
Ok, for the next release I'll add a final drive parameter.
Posted: Sun Oct 25, 2009 12:27 am
by Bboy_Burst
Awesome, I'll be looking forward to it. Thank you for your time.
Posted: Wed Feb 17, 2010 8:50 pm
by sebas22
Hondata wrote:Ok, for the next release I'll add a final drive parameter.
Excelent!!!
I have the same problem with 5,06 FD and 6th 0,738
Posted: Thu Feb 18, 2010 10:53 am
by Hondata
To get the cruise control working with a different gear set it was not a simple alteration of the gear ratios stored in the ECU, so the change was not made.
Posted: Thu Mar 04, 2010 3:28 am
by Bboy_Burst
Hondata wrote:To get the cruise control working with a different gear set it was not a simple alteration of the gear ratios stored in the ECU, so the change was not made.
Wait, I do not follow; does this mean there is no parameter to modify to get the cruise control working properly? Is there going to be a solution for this problem in the future?
Posted: Thu Mar 04, 2010 9:49 am
by Hondata
Is there going to be a solution for this problem in the future?
Possibly.
Posted: Tue Mar 16, 2010 8:12 am
by mr.stylo
Hondata wrote:Who much are you adjusting the speedo by? If the ECU detects clutch slippage from the speed/rpm to gear calculation it will cancel the cruise control.
could that be the reason why the cruise control don't work on the european FN2 in the 6th gear?