Hondata

We have had very little feedback on the changes to the boost control in V1.4.3, so the next release remains in beta.

Download here

· Fixed nitrous 3 fuel & ignition load & save behaviour.
· Added Ignition Dwell angle tables.
· Added Injector Phase angle tables.

Ignition Dwell. This was added so that turbo people can increase the coil change time to see if that gives a stronger spark. Be careful, as a longer dwell time will heat the coil up a lot more.

Injector phasing. It may be possible to gain a small amount of power by changing the injector phase. It may also be possible to improve the idle quality. Let us know.

Update 10/26/2009: V1.4.4.1: Fixed load/save of boost control duty cycle table.

As always thanks!

"Injector phasing. It may be possible to gain a small amount of power by changing the injector phase. It may also be possible to improve the idle quality. Let us know."

Think I have a project to play with this weekend!

Let you know my thought after testing this weekend!

Thanks HONDATA!

Gents forgot to say thanks for fixing the nitrous3 save behaviour.

Apeared to be working ok when I used it at the drags the other month. I feel it helped me gain the new PB of the day, allowing me to experiment with an idea i had. Unfortantly I hurt the motor at the end of the day but all seems to be working on the Nitrous controls, from the datalogs.

West

THANKS! Very happy with the results specially the coil dwell........appreciate the hard work you guys put in.

Hi,

Just curious on when the next SManager update would be. Also what will be updated?

8)