Page 6 of 6
Re: 08 FA5 fbo progress
Posted: Thu Feb 24, 2022 2:01 pm
by EFICU
Yeah, it's crazy how much that concept is true nowadays. Keep me in the loop on when they come in and when you plan to install them.
Re: 08 FA5 fbo progress
Posted: Mon Mar 14, 2022 9:06 am
by sam.witte7@gmail.com
THEY'RE HERE!
Re: 08 FA5 fbo progress
Posted: Mon Mar 14, 2022 12:34 pm
by EFICU
Awesome. Here is the first file for the RDXs. Upload this one before the first start and then take it for a normal datalog drive like you have been. It's basically just Rev09 with RDX injector data, so we're picking up where we left off essentially.
WitteS.SD.V2.Rev10 (Blended)(Vtec4500)(RDX).fpcal
Re: 08 FA5 fbo progress
Posted: Wed Mar 16, 2022 3:50 pm
by sam.witte7@gmail.com
I didn't think 24 saved, so you get two!
Re: 08 FA5 fbo progress
Posted: Wed Mar 16, 2022 4:12 pm
by EFICU
Yeah it looks great, I guess my RDX info is really good since it was pretty much dead on. Haha. I made a couple of 1-2% changes here and there, but it was pretty much dead on. Take this one for a spin when you can, we might be good to go. It's been knock free for a while and the fueling looks great. And now your injectors are at 70% at 8600 which is great.
WitteS.SD.V2.Rev11 (Blended)(Vtec4500)(RDX).fpcal
Re: 08 FA5 fbo progress
Posted: Wed Mar 16, 2022 4:23 pm
by sam.witte7@gmail.com
EFICU wrote: Wed Mar 16, 2022 4:12 pm
Yeah it looks great, I guess my RDX info is really good since it was pretty much dead on. Haha. I made a couple of 1-2% changes here and there, but it was pretty much dead on. Take this one for a spin when you can, we might be good to go. It's been knock free for a while and the fueling looks great. And now your injectors are at 70% at 8600 which is great.
WitteS.SD.V2.Rev11 (Blended)(Vtec4500)(RDX).fpcal
It felt good, I’ll see if I can make another run tonight. If not I’ll have one in the morning. 70%?! Hot dog we got a little sipper.
Re: 08 FA5 fbo progress
Posted: Wed Mar 16, 2022 4:27 pm
by EFICU
Yeah the RDXs flow roughly 30% more, so that's why you get a nice drop down to the 70s when you add them in a maxed out scenario.
Little side note, I started working with another guy on here who ended up having fake RDXs. Definitely easy to spot as his trims were rich at idle then lean at WOT. Based on my experience with the file I gave him, it shouldn't be that way. After talking with him, they were fake RDXs. So I know if sucked that you spent money in both directions, but based on this first datalog from you with the real RDXs, you made the right choice.
No rush on the next one, I like to see them consistent over multiple days anyways before I call them good to go.