Page 4 of 5
Re: Skunk2 CAI and FlashPro
Posted: Wed May 04, 2022 9:13 pm
by EFICU
It doesn't look too bad at all. I made a couple WOT fuel changes and some ignition for the knock. Take this one for a spin when you can.
Joshua97.HondataTest2.fpcal
Re: Skunk2 CAI and FlashPro
Posted: Mon May 09, 2022 10:40 am
by Joshua97
Hey here's a data log from the previous calibration you uploaded. Thank you!
datalog0028.fpdl
Re: Skunk2 CAI and FlashPro
Posted: Mon May 09, 2022 8:43 pm
by EFICU
Made some small adjustments for knock in this one. Take it for a spin when you can.
Joshua97.HondataTest3.fpcal
Re: Skunk2 CAI and FlashPro
Posted: Fri May 13, 2022 6:23 am
by Joshua97
Here's a data log from the most previous calibration you uploaded. Thanks!
datalog0029.fpdl
Re: Skunk2 CAI and FlashPro
Posted: Fri May 13, 2022 8:41 pm
by EFICU
Not too bad, still a few knock so I made some changes. It was mostly on your 6th gear cruising. So we'll see how it looks in this one.
Joshua97.HondataTest4.fpcal
Re: Skunk2 CAI and FlashPro
Posted: Thu May 19, 2022 2:01 pm
by ninoromo
Hello, I also have a 3.5" intake (k-tuned) and live at about 4000 feet above sea level. would one of the tunes aforementioned be appropriate/ safe? Or would I be better off using the sri/.../ catback basetune? I am all stock besides intake and flashpro. Thanks!
Re: Skunk2 CAI and FlashPro
Posted: Thu May 19, 2022 9:37 pm
by EFICU
ninoromo wrote: Thu May 19, 2022 2:01 pm
Hello, I also have a 3.5" intake (k-tuned) and live at about 4000 feet above sea level. would one of the tunes aforementioned be appropriate/ safe? Or would I be better off using the sri/.../ catback basetune? I am all stock besides intake and flashpro. Thanks!
What year is your car?
Re: Skunk2 CAI and FlashPro
Posted: Mon May 23, 2022 7:21 pm
by Joshua97
Hey sorry for the late reply. Had a shit show of a week but I was able to go out and collect a datalog for you with the most recent calibration you sent. Thanks!
datalog0030.fpdl
Re: Skunk2 CAI and FlashPro
Posted: Mon May 23, 2022 9:17 pm
by EFICU
No problem. That one looked pretty good. No knock which is good, so make another one when you can and we'll see if it stays knock free.
Re: Skunk2 CAI and FlashPro
Posted: Thu Jun 02, 2022 9:35 pm
by Joshua97
Hey here's a datalog from the same calibration. Everything feels good especially at WOT.
datalog0031.fpdl
Re: Skunk2 CAI and FlashPro
Posted: Fri Jun 03, 2022 10:17 pm
by EFICU
Yep it looks really good. We had a couple knock on the fourth gear and fifth gear pull. So I made a small adjustments there. All the fuel stuff looks great. Take this one for a spin when you can, no rush!
Joshua97.HondataTest5.fpcal
Re: Skunk2 CAI and FlashPro
Posted: Thu Jun 16, 2022 6:09 pm
by Joshua97
Here's a datalog for you from the recent calibration you sent me! Thank you!
datalog0032.fpdl
Re: Skunk2 CAI and FlashPro
Posted: Mon Jun 20, 2022 8:22 pm
by EFICU
Made some small adjustments for the knock again. See how this one looks.
Joshua97.HondataTest6.fpcal
Re: Skunk2 CAI and FlashPro
Posted: Mon Jun 27, 2022 10:31 pm
by Joshua97
Cool, here's a datalog from that calibration. Thank you!
datalog0033.fpdl
Re: Skunk2 CAI and FlashPro
Posted: Mon Jul 11, 2022 8:47 am
by Joshua97
I recently ordered a Skunk2 Megapower RR 76mm cat back exhaust. Should be here in a couple weeks. Any chance we can tweak the current calibration to get the most performance out of it or would we need to restart with a fresh calibration?