Hondata

Well I just did it and both cruise control and full throttle shift (which is the fuckin shit!! :P ) and both work without cutting either wire. Just purchase some of those lil connectors that tap into (make sure to get the right guage, red in this case for 18-20 guage i think) wires then connect it to the switch (not the black wire) and cut b8 wire (powersteering) and then connect them. Its easy as pie just never could get a good explaination.

oh, both switches will work, its just the cruise control one will kick in as soon as u put any pressure on the clutch as where the other switch wont cut on until the clutch is nearly all the way in.