Page 3 of 4
Re: 05 Element YH2 JDM K24A RBB2 E-tune support
Posted: Sun Jul 02, 2023 8:08 pm
by solokick3
i suck at reading too i just saw that you posted a base map for me a while ago feeling kinda stupid now lol
Re: 05 Element YH2 JDM K24A RBB2 E-tune support
Posted: Mon Jul 03, 2023 6:51 am
by CalibratEd
solokick3 wrote: Sun Jul 02, 2023 8:08 pm
i suck at reading too i just saw that you posted a base map for me a while ago feeling kinda stupid now lol
No worries, log the one you are using already.
-Ed
Re: 05 Element YH2 JDM K24A RBB2 E-tune support
Posted: Mon Jul 03, 2023 4:37 pm
by solokick3
I don't know why this didn't upload last night and sorry about the horrible data logs road was wet and this thing has a lot of tq-steer
Re: 05 Element YH2 JDM K24A RBB2 E-tune support
Posted: Mon Jul 03, 2023 5:35 pm
by CalibratEd
Wow you are hitting 12.4lbs of boost. I'm glad you switched to the 4 bar sensor. Its running rich down low and a little lean in boost. Columns 7 and 8 in VTC 20 and 30 non vtec need more fuel.
-Ed
Re: 05 Element YH2 JDM K24A RBB2 E-tune support
Posted: Tue Jul 04, 2023 8:19 pm
by solokick3
ok lol
Re: 05 Element YH2 JDM K24A RBB2 E-tune support
Posted: Wed Jul 05, 2023 8:02 am
by CalibratEd
solokick3 wrote: Tue Jul 04, 2023 8:19 pmok lol
Good one lol
-Ed
Re: 05 Element YH2 JDM K24A RBB2 E-tune support
Posted: Wed Jul 05, 2023 6:23 pm
by RiveraAk47
Hey Ed this is Solokick3 (Mike) im setting up this account for my friend Henry i have a couple questions can i pm you?
Re: 05 Element YH2 JDM K24A RBB2 E-tune support
Posted: Wed Jul 05, 2023 6:30 pm
by CalibratEd
RiveraAk47 wrote: Wed Jul 05, 2023 6:23 pm
Hey Ed this is Solokick3 (Mike) im setting up this account for my friend Henry i have a couple questions can i pm you?
Mike,
That's fine. You might have to pm me from your account. I think your friend's account can not pm until they have made a few posts.
-Ed
Re: 05 Element YH2 JDM K24A RBB2 E-tune support
Posted: Wed Jul 05, 2023 7:17 pm
by CalibratEd
Mike,
I made a few minor fuel changes. Load the new file and create a new datalog.
-Ed
Re: 05 Element YH2 JDM K24A RBB2 E-tune support
Posted: Fri Jul 07, 2023 8:56 pm
by solokick3
Here is the mess i came up with i forgot my glasses so i just hit record and drove lol
Re: 05 Element YH2 JDM K24A RBB2 E-tune support
Posted: Fri Jul 07, 2023 9:22 pm
by CalibratEd
Mike,
I cleaned up some of the part throttle fuel. The WOT fuel is dialed in.
-Ed
Re: 05 Element YH2 JDM K24A RBB2 E-tune support
Posted: Sun Jul 09, 2023 7:06 pm
by solokick3
So I went for a nice little ride I have 2 long logs I see a lot of knock just chill driving should I worry about that ? and I need a go-pro because that 2 foot yellow flame coming out of the dump tube exiting my hood in the dark looks sick lol
Re: 05 Element YH2 JDM K24A RBB2 E-tune support
Posted: Sun Jul 09, 2023 7:39 pm
by CalibratEd
solokick3 wrote: Sun Jul 09, 2023 7:06 pm
So I went for a nice little ride I have 2 long logs I see a lot of knock just chill driving should I worry about that ? and I need a go-pro because that 2 foot yellow flame coming out of the dump tube exiting my hood in the dark looks sick lol
Mike,
Fuel is not bad. I reduced timing in the area where knock was present. The knock count shot up. It must have hit cells you have not hit before.
load the file and datalog the car. If the knock is reduced in this next log you should be good to go.
-Ed
Re: 05 Element YH2 JDM K24A RBB2 E-tune support
Posted: Tue Jul 11, 2023 7:24 pm
by solokick3
I had fun with this one lol the Mid engine Vett wasn't expecting a toaster to pull on him lol some you may see where my coupler popped off thought I blew it up or dropped the anchor
Re: 05 Element YH2 JDM K24A RBB2 E-tune support
Posted: Wed Jul 12, 2023 3:03 pm
by CalibratEd
solokick3 wrote: Tue Jul 11, 2023 7:24 pm
I had fun with this one lol the Mid engine Vett wasn't expecting a toaster to pull on him lol some you may see where my coupler popped off thought I blew it up or dropped the anchor
I’m glad it’s running well. I will take a look at the log when I can.
-Ed