Page 3 of 5
Re: 2013 Civic Si Basemap help
Posted: Mon Mar 14, 2022 8:04 am
by TokyoBadBoy
Happy Monday! Here's a log with revision 11, thanks!
Re: 2013 Civic Si Basemap help
Posted: Mon Mar 14, 2022 12:29 pm
by EFICU
Still had a few random knock in the normal areas. I made a fee more changes, we'll see how the next one looks.
TokyoBadBoy.SD.Rev12 (Blended)(Vtec4300).fpcal
Re: 2013 Civic Si Basemap help
Posted: Tue Mar 15, 2022 9:42 am
by TokyoBadBoy
Heyo, it's a beautiful day! took 12 for a rip, lmk!
Re: 2013 Civic Si Basemap help
Posted: Tue Mar 15, 2022 3:43 pm
by EFICU
It looks great again, and knock free. Go ahead and datalog another drive later this week sometime and if it looks just as good I think we're there. I did make a couple fuel changes for WOT, so load this one and we'll see how the next one looks. You will want to look into getting RDX injectors or something in the near future. You're running in the 90% duty cycle range which is time to start thinking about adding them.
TokyoBadBoy.SD.Rev13 (Blended)(Vtec4300).fpcal
Re: 2013 Civic Si Basemap help
Posted: Sun Mar 20, 2022 12:30 pm
by TokyoBadBoy
Hey sorry been MIA for a few days, I'm putting on my stock exhaust back on tuesday.. Once my exhaust broke in the 3in is just too loud. Should I run this same tune and put up a datalog when I have it all on? Keeping the exhaust just replacing the catback.
Re: 2013 Civic Si Basemap help
Posted: Sun Mar 20, 2022 5:17 pm
by EFICU
No problem. Yeah just make a datalog with that calibration and we'll make adjustments as needed. It will most likely richen up a little bit, but that's easy to take care of.
Re: 2013 Civic Si Basemap help
Posted: Fri Mar 25, 2022 12:53 pm
by TokyoBadBoy
Hey! Here'sa datalog w rev13 and my stock exhaust back on. LMK! Thank you!
Re: 2013 Civic Si Basemap help
Posted: Sat Mar 26, 2022 12:03 am
by EFICU
Yeah it definitely richened up the WOT stuff. I made a few adjustments for it, take this one for a spin when you can.
TokyoBadBoy.SD.Rev14 (Blended)(Vtec4300).fpcal
Re: 2013 Civic Si Basemap help
Posted: Tue Mar 29, 2022 8:12 am
by TokyoBadBoy
Hello! Another one 8), feels good!
Re: 2013 Civic Si Basemap help
Posted: Tue Mar 29, 2022 4:57 pm
by EFICU
It looks really good. I made a couple small tweaks, we should be there on this one. Take it for a spin when you can.
TokyoBadBoy.SD.Rev15 (Blended)(Vtec4300).fpcal
Re: 2013 Civic Si Basemap help
Posted: Wed Mar 30, 2022 9:43 am
by TokyoBadBoy
anotha one !
Re: 2013 Civic Si Basemap help
Posted: Sat Apr 02, 2022 5:38 pm
by EFICU
Sorry for the delay. Overall it looked good, had a random knock on a fourth gear pull so I made an adjustment there. Take this one for a spin when you go somewhere.
TokyoBadBoy.SD.Rev16 (Blended)(Vtec4300).fpcal
Re: 2013 Civic Si Basemap help
Posted: Mon Apr 11, 2022 7:54 am
by TokyoBadBoy
Heyo, here's the datalog !
Re: 2013 Civic Si Basemap help
Posted: Mon Apr 11, 2022 5:50 pm
by EFICU
It looks really good. Go ahead and make another datalog later this week, we might be there.
Re: 2013 Civic Si Basemap help
Posted: Thu Apr 28, 2022 1:18 pm
by TokyoBadBoy
Hey! Sorry about the radio silence, been focusing on my finals. But here's a datalog! Also, might be picking up some injectors shortly, will we have to adjust for that? lmk!! Thanks man!