Page 3 of 3
Re: FlashProManager V2.8.7
Posted: Mon Jan 08, 2018 4:15 pm
by zaramatt
So using a window switch to a relay controlling a 5v source instead of the ethanol sensor. Would this work for a dry nitrous system? Could you retard timing and add fuel with the 5 volt signal?
Re: FlashProManager V2.8.7
Posted: Mon Jan 08, 2018 5:06 pm
by Hondata
It might work, but we would not recommend it since the ethanol input is designed for flex fuel.
Re: FlashProManager V2.8.7
Posted: Tue Jan 09, 2018 4:23 am
by R-12914
typer86 wrote: Mon Jan 08, 2018 7:15 am
Issue for: Civic SI/FN2 (Type-R) 2006:
If gear is in neutral and the clutch is not pressed, the engine is revving high until limiter! (overrevving)
Is this normal? Before the engine stop revving until 4500 rpm.
Please fix this.
Thx
Yes,
this function is unfortunately no longer available, since the change to set the "launch limiter" and "full throttle shift", etc. in FP-manager.
Actually, Honda has installed this function for engine protection in standstill (protection against overheating)!