Page 3 of 7
Re: FlashProManager V1.8.0 beta (Bluetooth)
Posted: Tue Apr 08, 2014 9:15 am
by Hondata
IcEMoCHa wrote:I'm having the non bluetooth version of the flashpro. The latest firmware seemed to have fixed the button issue.
But now the flashpro doesn't turn on/turn off itself (no lights) when there is no activity and cannot datalog/program.
I have to unplug the obd and replug it in before it works.
What procedure are you going through to give the behavior?
Re: FlashProManager V1.8.0 beta (Bluetooth)
Posted: Thu Apr 10, 2014 8:35 am
by IcEMoCHa
My flashpro is left in car from previous datalogging session. Reached destination, turned off engine.
Later when I turned key to ignition position the flashpro power light comes on for a sec then off. After that, the flashpro stays off even after engine is started.
Re: FlashProManager V1.8.0 beta (Bluetooth)
Posted: Thu Apr 10, 2014 2:05 pm
by terenceng
IcEMoCHa wrote:My flashpro is left in car from previous datalogging session. Reached destination, turned off engine.
Later when I turned key to ignition position the flashpro power light comes on for a sec then off. After that, the flashpro stays off even after engine is started.
excatly the same problem as one of my customers
however the flashpro is back to normal after a while.
hopefully it is just a bug.
thank you
Re: FlashProManager V1.8.0 beta (Bluetooth)
Posted: Thu Apr 10, 2014 8:24 pm
by soxfan143
IcEMoCHa wrote:My flashpro is left in car from previous datalogging session. Reached destination, turned off engine.
Later when I turned key to ignition position the flashpro power light comes on for a sec then off. After that, the flashpro stays off even after engine is started.
I'm having the same issue. I have to unplug the DLC connector every time I Shut the car off.
Re: FlashProManager V1.8.0 beta (Bluetooth)
Posted: Thu Apr 10, 2014 9:17 pm
by Hondata
Can you check that you have firmware 63, not 62?
Re: FlashProManager V1.8.0 beta (Bluetooth)
Posted: Fri Apr 11, 2014 7:23 am
by IcEMoCHa
Hondata wrote:Can you check that you have firmware 63, not 62?
Mine is 63
Re: FlashProManager V1.8.0 beta (Bluetooth)
Posted: Fri Apr 11, 2014 8:37 am
by soxfan143
Hondata wrote:Can you check that you have firmware 63, not 62?
I am also on 63
Re: FlashProManager V1.8.1 beta (Bluetooth)
Posted: Sun Apr 13, 2014 11:27 am
by mabo
Damn , i had a drag today and my flashpro also been screwed with that update. It lives its own life now , turns off all the time , i cant catch it to be turned on to make a datalog or upload a cal... have to play with turn off on ignition and plug\unplug it to DLX . Fix it !
Re: FlashProManager V1.8.1 beta (Bluetooth)
Posted: Sun Apr 13, 2014 11:27 am
by mabo
Forgot to add, 1.8.1 FPM , 63 FW .
Re: FlashProManager V1.8.1 beta (Bluetooth)
Posted: Sun Apr 13, 2014 10:05 pm
by VitViper
The option to disable the fuel economy alternator control on the ILX calibrations is kind of a nuisance... I have customers in cold climates that are having trouble due to the battery drainage from this stupid "feature" Honda added lol
Re: FlashProManager V1.8.0 beta (Bluetooth)
Posted: Mon Apr 14, 2014 1:07 am
by R-12914
IcEMoCHa wrote:My flashpro is left in car from previous datalogging session. Reached destination, turned off engine.
Later when I turned key to ignition position the flashpro power light comes on for a sec then off. After that, the flashpro stays off even after engine is started.
I have also the same problem with my non bluetooth Flashpro on version 1.8.1 beta with FW version 63.
Please try and fix this problem!!!
Re: FlashProManager V1.8.0 beta (Bluetooth)
Posted: Mon Apr 14, 2014 1:41 am
by romeochris
terenceng wrote:IcEMoCHa wrote:My flashpro is left in car from previous datalogging session. Reached destination, turned off engine.
Later when I turned key to ignition position the flashpro power light comes on for a sec then off. After that, the flashpro stays off even after engine is started.
excatly the same problem as one of my customers
however the flashpro is back to normal after a while.
hopefully it is just a bug.
thank you
Just updated the firmware 63 into my FP and tried on my JDM FD2, problem still happen.
I have to plug the FP AFTER I switched to ON position, otherwise the FP will not turn on. Mine is non-BT version FP. Thx!
Re: FlashProManager V1.8.2 beta (Bluetooth)
Posted: Tue Apr 22, 2014 2:02 am
by sass
Hondata ver. 1.6.3 fuel level in racing calibration was working fine on dash of FN2. In ver 1.8.1 and 1.8.2 fuel level fails + - 15-20
Re: FlashProManager V1.8.2 beta (Bluetooth)
Posted: Tue Apr 22, 2014 7:58 am
by Hondata
sass wrote:Hondata ver. 1.6.3 fuel level in racing calibration was working fine on dash of FN2. In ver 1.8.1 and 1.8.2 fuel level fails + - 15-20
We have not changed the race calibration code for the last year or so. You should be aware that this is a 'race' calibration, and the fuel level / economy will not work correctly on the FN2. Use a FN2 calibration with Speed/Density tables enabled.
Re: FlashProManager V1.8.2 beta (Bluetooth)
Posted: Tue Apr 22, 2014 12:02 pm
by VitViper
We need P0128 disable on the 06-11 Civic Si calibrations -- I have customers throwing that code with low temp thermos (and my car has a low temp as well).