Page 2 of 4
Posted: Tue Jul 07, 2009 1:15 pm
by walter
Spunkster wrote:Are you using the stock ECU or the Group-N ECU with the FlashPro?
I'm using stock ECU. I've sold Group-N ECU, cruise control worked with Group-N ECU.
I made mistake, my stock ECU number is RSP-E02, not RSP-E03.
Posted: Tue Jul 07, 2009 1:23 pm
by mw1978
HONDATA cruise control work only on race MAP caliration but not on 6th gear. 4th,5th is fine but on 6th doesn work!!!
REV lights also doesnt work on MAP calibration
TODAY i found problem with fuel gauge, It drop 1cm after 5 miles. My car used 30L of petrol!!!
Posted: Tue Jul 07, 2009 1:23 pm
by dinoc
Also, trip computer and trip fuel consumption worked fine with the Group-N ECU.
Posted: Tue Jul 07, 2009 1:29 pm
by chris87
when you will fix this Hondata ?
Posted: Tue Jul 07, 2009 1:45 pm
by dinoc
It looks like there are a lot of bugs with the FN2 calibrations ... I think I'll stick to Hondata ECU and not buy this until this are solved.
I don't understand why , the Group-N calibration does not offer the same functionalities (reported as bugs above) like the Hondata ECU Group-N did.
Posted: Tue Jul 07, 2009 4:21 pm
by Hondata
The trip meter will not work with race calibrations - this is in the help file.
There is a problem with the cruise control on AFM calibrations for the Euro CTR. This has been fixed for the next release, which will be in the next day.
Posted: Tue Jul 07, 2009 11:06 pm
by walter
Hondata wrote:The trip meter will not work with race calibrations - this is in the help file.
There is a problem with the cruise control on AFM calibrations for the Euro CTR. This has been fixed for the next release, which will be in the next day.
Thanks Hondata :D
Posted: Wed Jul 08, 2009 12:54 am
by chris87
Thank you Hondata !
Posted: Wed Jul 08, 2009 1:21 am
by dinoc
How about the rev lights, are this working ?
Posted: Wed Jul 08, 2009 7:22 am
by Hondata
If the 'rev lights' use the dash CAN bus then chances are they will not work with the race calibration.
Please confirm that your gear ratios are:
1 3.266
2 2.13
3 1.517
4 1.147
5 0.921
6 0.738
Final 5.062
Posted: Wed Jul 08, 2009 1:00 pm
by dinoc
Yes, the gear ratios are correct.
Posted: Thu Jul 09, 2009 12:01 am
by chris87
when comes the fix ?
Posted: Thu Jul 09, 2009 1:11 am
by dinoc
There is a tuner in SIngapore who managed to have trip computer and fuel cunsumption enabled with MAP calibrations on a FN2.
If I understand correctly is Joel from drivencrazy.com.sg
So I guess this is possible to be done?
Posted: Thu Jul 09, 2009 10:15 am
by dinoc
Well I've found out they were using a MAF calibration (not MAP) that's why he managed to have everything working.
Posted: Tue Jul 21, 2009 3:10 pm
by walter
Cruise control works on Group N calibration, also it works on MAP calibration, except on 6th gear. Can you fix that?