Hondata

Posted: **Tue Apr 29, 2008 4:50 pm**

Spunkster wrote:If you have used the wrong resistors then you will damage the ecu and it will not work. This seems to be the case here.

Ecu's prepared by Hondata have a 0% failure rate for the PWM output.

Does that apply to THIS specific part of the ECU?

Posted: **Wed Apr 30, 2008 9:31 pm**

I have never had a problem adding PWM support to any ecu, so I'm going to say it is installer error in all cases.

Hondata

PWM not chipped good need help!!!!