Page 2 of 2
Posted: Fri Jun 17, 2005 4:51 pm
by Clutch
oni wrote:I may be reading the code wrong. The light blinks twice and then a third time really fast.
Code 21 VTEC spool solenoid valve
Disable in ROMeditor software.
Posted: Fri Jun 17, 2005 5:22 pm
by oni
I'm obviouly a novice at this, but if you don't mind my asking. How does one determine the blinks into a numbered code?
Also I thought that the knock sensor could be disabled by doing something to j12?
Posted: Sat Jun 18, 2005 9:34 am
by Clutch
oni wrote:I'm obviouly a novice at this, but if you don't mind my asking. How does one determine the blinks into a numbered code?
Also I thought that the knock sensor could be disabled by doing something to j12?
http://www.hondata.com/techecucodes.html
Read this in the link and it will tell you how to read codes.
J12 jumper converts the ECU to communicate half duplex or full duplex, when j12 is cut it switches into full duplex and allows faster communications...for datalogging.
Posted: Sat Jun 18, 2005 9:38 am
by oni
So then my code is a 21 - vtec spool solenoid valve. Great! I was happier when I thought I just had an automatic ECU. So what hell should I do now to troubleshoot this bullshit?
Posted: Mon Jun 20, 2005 12:17 pm
by oni
One thing I dont understand is that when I plug in the OEM ECU the CEL is gone. So why would one ECU throw that code and not the other?
Posted: Sat Aug 06, 2005 1:57 pm
by Wafler
That seems to be - 21 - , which is "Spool Solenoid Valve"
Posted: Sun Aug 07, 2005 7:38 pm
by DutchEG6
Clutch wrote:oni wrote:I may be reading the code wrong. The light blinks twice and then a third time really fast.
Code 21 VTEC spool solenoid valve
Disable in ROMeditor software.
this is your problem...