Page 2 of 2
Re: FlashProManager 4.3.6
Posted: Thu Dec 05, 2024 11:38 am
by Spunkster
The software engineers will have to look at it.
Re: FlashProManager 4.3.6
Posted: Thu Dec 05, 2024 1:04 pm
by Hondata
If this is the K13/K14 or U03/U04 that you sent then around one week.
Re: FlashProManager 4.3.6
Posted: Thu Dec 05, 2024 6:42 pm
by William.Y
Great! Will waiting for update, many thanks !
Re: FlashProManager 4.3.6
Posted: Mon Dec 09, 2024 9:55 pm
by William.Y
I got another JDM FL5 , Chassis: FL5-110 , ECU No. 66V-J020 , can FP support it ? Many thanks
Re: FlashProManager 4.3.6
Posted: Tue Dec 10, 2024 9:33 am
by Hondata
66V-J02 is already supported. Do you have a problem with that ECU? You may need to read the calibration ID as it might be different from the ECU part number.
Re: FlashProManager 4.3.6
Posted: Tue Dec 10, 2024 9:25 pm
by William.Y
calibration ID : 37805-66V-J020 , during uploading calibration, window pop up [upload fail]
Re: FlashProManager 4.3.6
Posted: Wed Dec 11, 2024 8:05 am
by Hondata
Not a problem with the FlashPro support.
Re: FlashProManager 4.3.6
Posted: Wed Dec 11, 2024 10:05 am
by Spunkster
What is the FlashPro serial number?
With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.