Page 2 of 2
Re: K pro not working
Posted: Mon Nov 14, 2022 2:10 pm
by MoeNyc
From what I have read so far from other post it’s my daughter board. I seen someone else with the same issue. I can’t clear security or upload at all.
Re: K pro not working
Posted: Mon Nov 14, 2022 3:56 pm
by Spunkster
Did you try erasing the ECU or uploading to it while it was connected to the other vehicle?
Re: K pro not working
Posted: Mon Nov 14, 2022 4:10 pm
by MoeNyc
Yes it did the same exact thing.
And I also have it current connected to my pc and still won’t let me. Same blinking red light.
Re: K pro not working
Posted: Tue Nov 15, 2022 10:26 am
by Spunkster
Answered via email.
Re: K pro not working
Posted: Fri Nov 25, 2022 4:11 am
by Yankee1up
Am having the same. Issue car stuck in limp mode can’t connect to kpro I. Need help red light flashing also
Re: K pro not working
Posted: Mon Nov 28, 2022 4:42 pm
by Spunkster
email support <at> hondata.com with complete details and description of the problem.
Re: K pro not working
Posted: Thu Dec 01, 2022 9:44 am
by Yankee1up
Spunkster wrote: Mon Nov 28, 2022 4:42 pm
email support <at> hondata.com with complete details and description of the problem.
I’ve done this little to no help
Re: K pro not working
Posted: Thu Dec 01, 2022 9:47 am
by Yankee1up
Spunkster wrote: Mon Nov 28, 2022 4:42 pm
email support <at> hondata.com with complete details and description of the problem.
The car starts no problem but has a 4k rpm limiter I can’t do nothing on the kpro manager all the buttons are gray in not clickable the computer recognize the ecu but it I can’t upload download or check anything on the ecu no codes it just says online ignition off and it’s on also the red light blinking