Page 2 of 2
Re: Need help Tuning k20Z3 and some Bolt ons with E85
Posted: Fri Dec 24, 2021 11:54 pm
by Dash21182
EFICU wrote: Fri Dec 24, 2021 10:32 pm
Okay, just got to take a look at it. It's definitely on the rich side, but the fuel trims are hanging onto it for the most part. They are close to max, but they're keeping it close.
Can you look in the pamphlet and try to find the injector data for me? It will give you a cell chart like an excel spreadsheet, and it will go like 6 8 10 12 16 for volts, then injector data below it. Or something similar to this below. This will give us a good start to things going using this data.
Injector Data Sample.jpg
This is What I found online for the Ev14 550 injectors
Re: Need help Tuning k20Z3 and some Bolt ons with E85
Posted: Sat Dec 25, 2021 12:14 am
by Dash21182
EFICU wrote: Fri Dec 24, 2021 10:32 pm
Okay, just got to take a look at it. It's definitely on the rich side, but the fuel trims are hanging onto it for the most part. They are close to max, but they're keeping it close.
Can you look in the pamphlet and try to find the injector data for me? It will give you a cell chart like an excel spreadsheet, and it will go like 6 8 10 12 16 for volts, then injector data below it. Or something similar to this below. This will give us a good start to things going using this data.
Injector Data Sample.jpg
Re: Need help Tuning k20Z3 and some Bolt ons with E85
Posted: Sat Dec 25, 2021 12:15 am
by EFICU
Yeah I found the data for them on a few websites to ensure they're right. I emailed you the calibration, I don't want to post calibrations on here that others may download and have issues. So please check your email and reply to me there.
And yeah, that data is what I found, and another site with the same info to verify we're on the right track. I just want to post calibrations on here for bigger injectors which might cause issues for other people.
Re: Need help Tuning k20Z3 and some Bolt ons with E85
Posted: Sat Dec 25, 2021 11:30 am
by Dash21182
EFICU wrote: Sat Dec 25, 2021 12:15 am
Yeah I found the data for them on a few websites to ensure they're right. I emailed you the calibration, I don't want to post calibrations on here that others may download and have issues. So please check your email and reply to me there.
And yeah, that data is what I found, and another site with the same info to verify we're on the right track. I just want to post calibrations on here for bigger injectors which might cause issues for other people.
Good morning and Merry Christmas this is the Data-log from this mornings drive with your new revisions
Re: Need help Tuning k20Z3 and some Bolt ons with E85
Posted: Sat Dec 25, 2021 3:04 pm
by Dash21182
EFICU wrote: Sat Dec 25, 2021 12:15 am
Yeah I found the data for them on a few websites to ensure they're right. I emailed you the calibration, I don't want to post calibrations on here that others may download and have issues. So please check your email and reply to me there.
And yeah, that data is what I found, and another site with the same info to verify we're on the right track. I just want to post calibrations on here for bigger injectors which might cause issues for other people.
New DataLog from a drive I just did