Hondata

Sounds good. We'll see how it looks.

just home log done sry its soooo late.

No problem at all man. It looks great, I made a few small fuel adjustments and one ignition adjustments for a knock we had. Other than that, it's looking good. Here is the next one. Same 15* cam angle with vtec now at 4000. Same datalog and driving style in this one.

Got coffee. Logging now.

Log done. On the WOT pull i hit a bump and went partial throttle for a moment but finished the pull. Let me know if this needs to be redone.

Looks really good. One small knock in part throttle, other than that it looks great. Made a couple fuel adjustments. Onto the 30* cam angle now with vtec at 5500 again. Only two or three more revisions and then we blend everything out to build our cam angle map and stuff. So we're getting there, sorry if this stuff is kind of boring and time consuming. All part of doing it properly.

Same datalog and driving style.

Not boring I love this stuff. Hoping to learn to be able to do this on my own one day. The experience is invaluable. Going to log. Thanks!

Okay good. I try to be as through as my OCD will allow me for this stuff, but I also want to get you guys to the fun parts quickly. I'm always struggling with that. I think I have a good strategy for that in how I am doing this with you, this is my newest way to do it while getting the important data and doing it quickly. Glad you're okay with it, makes for a better tune in the end.

Log done. Had to let off again on the WOT but finished...might try a different route on the next one.

Looking really good. No knock, fuel was really close. Now we will do the 30* cam with vtec at 4000. Take this one for a spin, we really only need the third gear WOT pull. So, if you want to make like a 10 minute datalog with the third gear WOT pull go ahead. If you want to do the 20-30 minute datalog that is fine too, just saying.

Okay sounds good.

Log done. Good WOT this time.

Looking good. We will do a quick one on the 40* cam to see how much of the 40 cam it wants in vtec. After this one we will blend everything out. This is another one you can take for another quick 10 minute drive if you want, just be sure to get the clean third gear pull in. Vtec will be at 4300 on this one.

Okay, no problem. Going now.

Log done. Clean WOT pull.