Hondata

i tried that one and it felt good. here is another 3rd gear pull from 2500 to 7500ish rpm WOT

Looks really good. I made a couple changes to the WOT fueling, and a few ignition adjustments for knock. If you can, still make the 20-30 datalogs and include the third gear pull from 2500-7500. That way we can check for part throttle knock and all that. We should be there on this one, we were really close.

I flashed this new revision just a little bit ago. I will try to get some pulls in after work. I appreciate all your help

Sounds good. You're welcome!

here is a datalog of the most recent calibration. there is a wot 3rd gear pull from 2500 to 7500 rpm in the beginning, followed by some highway driving and city driving and some backroad driving. i hope this has some good info in here for you. let me know and thanks again

Yeah it looks really good. Had 1 new knock pop up in part throttle. It's probably a random deal, but I touched up the ignition right there. I also made a couple small fuel adjustments. It's pretty much there. We'll see how it looks in this next one. If there are no new knock events, we should be there. No rush on the next datalog, but whenever you get it post it up and we'll take a look.

here is a data log for the latest revision. i did a wot pull but i think it may have started in 2nd gear.

Looks good. We had a new knock on WOT. Although, the highest throttle pedal I saw was like 40% at the pedal and 60% at the throttle body, so you never went full WOT. I made a small change to the ignition for the knock. Take this one for a spin and we'll see how it looks. Try to get to full WOT if you can in third though like you have been. It's pretty much there though, just chasing those little gremlins. Even though a random knock here and there is no big deal, I always aim for zero for you guys.

i was just looking at that knock on cylinder 2. i will come back soon with another data log. thank you

here are a few data logs from the latest revision. data log 19 has a 3rd gear pull wot from 2500-7500rpm

cylinders 1-3 all counted 1 knock each on data log 19 during that wot pull. this revision feels great though.

Okay, I made a couple small ignition changes for what we saw in that datalog. Fueling looked really good, made a small adjustment there, but mostly focused on the knock in each datalog. Take this one for a drive and we will see how it looks.

here are a couple data logs for the latest revision. data log 20 is just some city driving, and 21 is a 3rd gear wot pull from 2500 - 7500 rpm

Okay, lot's of progress. No knock, WOT fuel was just a little off, but really close. Sorry I'm OCD about things which is why I nitpick little things. We should be there on this one, again just checking for knock and good WOT fueling. It looks great though, glad to see no knock.

Same datalog and driving for this datalog.

here are a couple logs from the most recent calibration revision. it feels great and i am glad to hear there is no knocks