Page 2 of 2
Re: Blinking leds
Posted: Fri Jul 31, 2020 1:45 pm
by Spunkster
Will it allow you to upload a calibration to the ECU now?
Re: Blinking leds
Posted: Fri Jul 31, 2020 11:45 pm
by antkouv
I will be able to check on Monday and will revert with my findings.
Re: Blinking leds
Posted: Mon Aug 03, 2020 1:26 pm
by antkouv
Sorry but no. The same issue exists. Cannot upload and the leds are blinking as per the video I have sent you.
Re: Blinking leds
Posted: Mon Aug 03, 2020 1:27 pm
by antkouv
We also tested with a diagnostic tool and that one connects as normal with the car.
Re: Blinking leds
Posted: Mon Aug 03, 2020 2:59 pm
by Spunkster
With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.
Re: Blinking leds
Posted: Tue Aug 04, 2020 12:18 am
by antkouv
I have already done this and sent it to you, last week. Nothing has been altered since then.
Re: Blinking leds
Posted: Tue Aug 04, 2020 9:55 am
by Spunkster
Please send the feedback again, as nothing was received.
Re: Blinking leds
Posted: Tue Aug 04, 2020 10:12 am
by antkouv
I will be able to do this on Saturday as I am away.
Re: Blinking leds
Posted: Tue Aug 04, 2020 11:01 am
by Spunkster
With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.
Re: Blinking leds
Posted: Sat Aug 08, 2020 3:55 am
by antkouv
Feedback sent again, please check
Re: Blinking leds
Posted: Mon Aug 10, 2020 11:29 am
by Spunkster
replied via email
Re: Blinking leds
Posted: Thu Sep 17, 2020 7:44 am
by antkouv
I just received the Flashpro from you (rma 4565, no fault found). I now connected it to my laptop and I get the attached message.
Re: Blinking leds
Posted: Thu Sep 17, 2020 8:04 am
by antkouv
I connect the Fpro to the car and the leds blink again (even without the laptop connected). Please note that I have a Plex tuning mSDM device also connected on the can bus. Could this be causing any issues?
Re: Blinking leds
Posted: Thu Sep 17, 2020 8:59 am
by Hondata
The diagnostic bus in a vehicle can only ever have one device attached to it at a time.
If you attach both the FlashPro and something else to the DLC then this will corrupt the CAN data in the FlashPro.
Re: Blinking leds
Posted: Thu Sep 17, 2020 10:05 am
by antkouv
Ok. I will try removing the other device and check again