Page 2 of 2
Re: Solid Red Light Problem
Posted: Wed Jan 15, 2014 2:10 pm
by jason marteja
It seems like I do have the map relocator installed (called my mechanic)
Re: Solid Red Light Problem
Posted: Wed Jan 15, 2014 3:07 pm
by Spunkster
Can you take a picture of your MAP sensor installed and post it here. This way we can verify it is properly reading boost.
Re: Solid Red Light Problem
Posted: Wed Jan 15, 2014 3:46 pm
by jason marteja
I certainly can.
Many thanks!
Re: Solid Red Light Problem
Posted: Wed Jan 15, 2014 6:12 pm
by jason marteja
Here you go. Nothing is connected to it. Unlike the first picture I found in the site. Second (larger) pic is mine.
Re: Solid Red Light Problem
Posted: Thu Jan 16, 2014 11:01 am
by Spunkster
First of all your map sensor is not even plugged in. That is a problem. Also you do not have a map sensor relocator installed so that it can read boost from the supercharger.
Please see
http://www.hondata.com/tech_jrscinstall.html for more details.
Re: Solid Red Light Problem
Posted: Thu Jan 16, 2014 11:16 am
by jason marteja
Thanks for your help. Appreciate it.
One last question: why does the car start if I use the stock ecu
Re: Solid Red Light Problem
Posted: Thu Jan 16, 2014 11:20 am
by Spunkster
It may start, but will not be driveable without the map sensor connected and the relocator installed, especially with larger than stock injectors.
Re: Solid Red Light Problem
Posted: Mon Jan 20, 2014 10:22 pm
by jason marteja
it turns out my car is using 3 bar for map sensor. Car starts now. However, the car is running too lean at idle and at low speed. I didn't really drive it for too long as I was afraid I might damage the motor. How do I make it richer?
Re: Solid Red Light Problem
Posted: Tue Jan 21, 2014 11:42 am
by Spunkster
You need to add fuel to the areas of the map it is running lean. If you are unsure of how to do this, I highly recommend that you take this to a tuner to tune properly or you may damage your engine.
Re: Solid Red Light Problem
Posted: Tue Jan 21, 2014 1:11 pm
by jason marteja
Alright. Thanks again!