Page 2 of 2
Re: JDM EP3 CTR knock issues
Posted: Mon Jan 07, 2013 3:33 pm
by Spunkster
Without making any changes, does unplugging the ECU and plugging it back in make any difference i how it runs?
Re: JDM EP3 CTR knock issues
Posted: Mon Jan 07, 2013 4:10 pm
by PeeJay
I assume you mean unplugging the ECU from the engine? Ie the A, B and C connector?
Re: JDM EP3 CTR knock issues
Posted: Mon Jan 07, 2013 4:23 pm
by Spunkster
correct
Re: JDM EP3 CTR knock issues
Posted: Tue Jan 08, 2013 6:41 pm
by PeeJay
Tried that, didn't make any difference. Maybe I'll try another datalog?
Re: JDM EP3 CTR knock issues
Posted: Wed Jan 09, 2013 10:25 am
by Spunkster
If no changes have been made to the calibration and it is not runing correctly then you may have a mechanical problem.
Re: JDM EP3 CTR knock issues
Posted: Thu Jan 10, 2013 1:41 am
by Nazul
Or bad fuel, what quality did u tank?
Re: JDM EP3 CTR knock issues
Posted: Thu Jan 10, 2013 2:51 am
by PeeJay
Nazul wrote:Or bad fuel, what quality did u tank?
BP 98 RON
Re: JDM EP3 CTR knock issues
Posted: Thu Jan 10, 2013 3:33 am
by Nazul
I would suggest checking your knock sensor.
Seems to me that its malfunctioning.
Re: JDM EP3 CTR knock issues
Posted: Thu Jan 10, 2013 7:12 pm
by PeeJay
I'd actually like to try a bog standard JDM EP3 ECU first. If the engine runs on that without any issue, i'd know for sure that the problem is in the maps (or in the K-Pro?...)
Anyone got one on the shelf that i can borrow?... Happy to pay for postage etc.
Re: JDM EP3 CTR knock issues
Posted: Fri Jan 11, 2013 2:06 am
by Nazul
Well go to a honda dealer then, then can do that.