Page 2 of 2
Re: FlashProManager V1.3.2 (Beta)
Posted: Sun Jul 08, 2012 7:05 am
by Hondata
Delete the update.exe file and try again.
Re: FlashProManager V1.3.3 (Beta)
Posted: Tue Jul 10, 2012 5:24 pm
by nunoctr
thanks hondata for the new beta 1.3.3, for the first time I saw today my spoon sports cams going full 50º with the afm (map fuel) calibration
Re: FlashProManager V1.3.3 (Beta)
Posted: Wed Jul 11, 2012 12:04 am
by civicRSA
Great additional features.
Thank you.
[Civic Si] Added boost cut, fuel overrun cut delay, second ECT sensor, VTC cam angle index.
Any chance these can be added to the Euro CTR?
[Civic CTR - Euro] Increased maximum cam angle to 50 degrees, added warm up retard table.
Don't seem to find this table
Re: FlashProManager V1.3.3 (Beta)
Posted: Wed Jul 11, 2012 3:38 am
by nunoctr
I can't find that table also!
the fuel overrun cut delay it's on the Fn2 calibrations for some time.
Re: FlashProManager V1.3.3 (Beta)
Posted: Wed Jul 11, 2012 9:10 am
by Hondata
Next release then.
Re: FlashProManager V1.3.3 (Beta)
Posted: Tue Jul 17, 2012 6:03 pm
by all-black
i dont think the auto gear putting in the teeth makes the correcting to speed. you still have to change add or remove percent to have an accurate speed
Re: FlashProManager V1.3.3 (Beta)
Posted: Wed Jul 18, 2012 8:13 am
by Hondata
For the dash you will still have to correct the speed. However, the ECU speed should be closer.
Posted: Fri Aug 10, 2012 7:18 pm
by MJz
[Civic Si / Type R] Added VTC deceleration angle control.
I also cannot find VTC deceleration table on Civic-Si-RRC 2-Reflash calibrations...
Re: FlashProManager V1.3.3
Posted: Mon Aug 13, 2012 9:48 am
by Spunkster
Go to Options and make sure you have Show Advanced Parameters checked.
^_^
Posted: Tue Aug 14, 2012 8:16 am
by MJz
Spunkster wrote:Go to Options and make sure you have Show Advanced Parameters checked.
I'm already set to Advanced Parameters.
Re: FlashProManager V1.3.3
Posted: Tue Aug 14, 2012 10:52 am
by Spunkster
Once you check the box you will be able to check the other box. I have verified this is working.
Re: FlashProManager V1.3.3
Posted: Tue Aug 14, 2012 11:36 am
by MJz
Spunkster wrote:Once you check the box you will be able to check the other box. I have verified this is working.
But in Civic-Si-RRC 2-Reflash calibrations（FD2 Hondata Type R Reflash） not working...
Re: FlashProManager V1.3.3
Posted: Tue Aug 14, 2012 11:57 am
by Spunkster
I'm sorry, but that calibration doe snot have the code. YOu will have to use a different calibration if you want that option. It is a preset reflash that does not have the same options as the rest.
^_^
Posted: Tue Aug 14, 2012 11:58 am
by MJz
Spunkster wrote:I'm sorry, but that calibration doe snot have the code. YOu will have to use a different calibration if you want that option. It is a preset reflash that does not have the same options as the rest.
I can use other calibration upload to ABA-FD2 Type R ECU？