Page 2 of 2
Re: problem with kpro ecu not recognizing ingnition being on
Posted: Tue Apr 29, 2014 10:23 am
by voodooo
20140429_164932.jpg
20140429_164750.jpg
20140429_164741.jpg
20140429_164653.jpg
20140429_164644.jpg
Re: problem with kpro ecu not recognizing ingnition being on
Posted: Tue Apr 29, 2014 10:27 am
by voodooo
20140429_165109.jpg
20140429_165044.jpg
20140429_164955.jpg
20140429_164947.jpg
20140429_164938.jpg
Re: problem with kpro ecu not recognizing ingnition being on
Posted: Tue Apr 29, 2014 10:31 am
by voodooo
20140429_165321.jpg
20140429_165300.jpg
20140429_165249.jpg
20140429_165238.jpg
20140429_165147.jpg
Re: problem with kpro ecu not recognizing ingnition being on
Posted: Tue Apr 29, 2014 10:33 am
by voodooo
20140429_165446.jpg
20140429_165430.jpg
20140429_165423.jpg
20140429_165334.jpg
20140429_165327.jpg
Re: problem with kpro ecu not recognizing ingnition being on
Posted: Tue Apr 29, 2014 10:34 am
by voodooo
20140429_165500.jpg
20140429_165456.jpg
20140429_165453.jpg
Re: problem with kpro ecu not recognizing ingnition being on
Posted: Tue Apr 29, 2014 4:37 pm
by Spunkster
What is the serial number on the K-Pro board inside the ECU? Who did this installation?
Re: problem with kpro ecu not recognizing ingnition being on
Posted: Wed Apr 30, 2014 12:32 am
by voodooo
Hondata K-pro-III 12799
The ecu is installed to other people, i don't know but working perfect for more time, i have check and the ecu is istalled perfect.
best regards
Re: problem with kpro ecu not recognizing ingnition being on
Posted: Wed Apr 30, 2014 4:26 pm
by Spunkster
Please contact Alientech about this issue:
Alientech SRL
Via dei Cordari, 1
Trino (VC) 13039 Italy
+39 0161 801
KPro installer
fabio@alientech.to
http://www.alientech.to/
Re: problem with kpro ecu not recognizing ingnition being on
Posted: Sun May 04, 2014 12:51 am
by voodooo
I have contact for first, i know very well and i buy the s300 or kpro to him. Alientech to phone have reply me to answer you, because him sell only...
Re: problem with kpro ecu not recognizing ingnition being on
Posted: Fri Jul 25, 2014 4:29 pm
by sracer
voodooo wrote:I have contact for first, i know very well and i buy the s300 or kpro to him. Alientech to phone have reply me to answer you, because him sell only...
hi;
have you solved the problem? i am having the same trouble with this. that's why i am asking. thank you
Re: problem with kpro ecu not recognizing ingnition being on
Posted: Thu Jun 02, 2022 8:55 pm
by JDM FOOLAY
I'm having the same problem 97 EK hatch with k swap and doesn't give power to wire harness
Re: problem with kpro ecu not recognizing ingnition being on
Posted: Thu Jun 02, 2022 8:58 pm
by JDM FOOLAY
I have PNB ECU with k pro V4 was working fine removed the engine to put stage 3 competition clutch put back everything how it was now turn on crank but won't turn plug USB to laptop giving the same problem as the guy post