Hondata

peter.d wrote:So what exactly Hondata did to help you ?
Are you running FlashPro with TSX ECU ?

Hondata made new FlashPro manager where you can disable EVAP errors that CL9 euro dash would be clean from "check engine" light.
Core58 and I using TSX ECU 07-08 with FlashPro in our Accord CL9 euro. You must buy same kit as for TSX 04-06

hello for the accord cl9 do i need to buy this kit
http://www.hondata.com/flashpro_tsx.html
and the Adapter kit for the tsx 2004-2006 then a tsx ecu 07-08?
does it work on cl9's older than 2006?
thank you

viggen wrote:hello for the accord cl9 do i need to buy this kit
http://www.hondata.com/flashpro_tsx.html
and the Adapter kit for the tsx 2004-2006 then a tsx ecu 07-08?
does it work on cl9's older than 2006?
thank you

yes
all works for 2003-2008 CL9

Hi!

please once again explain me what I need to run FlashPro?

Do I have to send my ECU (37820-RBB-E06) somewhere?
Or I have to buy TSX ECU?
And how do I attach Flash Pro?

at933 wrote:Hi!

please once again explain me what I need to run FlashPro?

Do I have to send my ECU (37820-RBB-E06) somewhere?
Or I have to buy TSX ECU?
And how do I attach Flash Pro?

Only the last once again and only for you .

http://hondata.com/flashpro_tsx.html

1. You have to pick a 07-08 TSX ecu, flashpro cant flash any other CL9 ecu, just 07-08.

Everything else you can find here :

http://hondata.com/downloads/tsx_ecu_removal.pdf

http://hondata.com/downloads/04-06_flas ... nstall.pdf

http://www.youtube.com/watch?v=dHwkDRBJyp0 - with this video even a dumb can register and connect ecu.

Change your mind bro, if you cant find what is on top then i afraid youll need a compass soon to find a WC in your home.

;)

at933 wrote:;)

Maybe you are Sirmais from LV ? :)

True. That's me.

at933 wrote:True. That's me.

Meet in FastLap if you be there :) Explain all and even show if you want.

Hi, so I have flashpro ordered. I was just checking my CAN Connector, and there seems to be no slot empty in which to connect the CAN Adapter harness. There are 7 slots, like in the pdf showing how it's done, but all are full!!?? Is there any other place where I could connect the CAN Adapter, or am i out of luck?? I saw there is a green Block, right beside a Brown Block, closer to the front of the glove box, with color dotted wires, but i fear this is my audio system connections.. I drive an 07 Accord cl9 executive. Any help would be very cool!!
Thanks
Mounty

So, i found out, thanks to mabo, that i will have to solder wires to the High and Low CAN connectors, either on the ecu/ecm side of the wiring harness, or up under the glove box to the CAN connector.. (Red/grey dots>CAN Low and White/grey dots>CAN High, 3rd plug from the top in the pictures) if anyone is having troubles @ ecu/ecm side. it's the right most connector, pinned as in picture below.
Mounty

i cant even find those green canbus plugs on my ukdm cl9 :/

does the cruise control work?

dinoc wrote:does the cruise control work?

havnt even checked mine tbh. ill check and let you know, pretty sure it does though

please do, sombody above reported it didn't work