Page 2 of 2
Re: SManager V2.0.0 (beta)
Posted: Mon Feb 13, 2012 9:28 pm
by nayr_one
This registration stuff is total garbage what if i dont have internet where im setting up a car...
Re: SManager V2.0.0 (beta)
Posted: Thu Feb 16, 2012 5:16 pm
by Wolli
can i use the same socket or do i have to solder a new one?
Re: SManager V2.0.0 (beta)
Posted: Fri Feb 17, 2012 10:21 am
by Spunkster
socketing for all s300s is the same
Re: SManager V2.0.0 (beta)
Posted: Tue Feb 28, 2012 6:38 am
by Johnny_9
Does the v2.0 come with 8 analog in connector as shown in the URL below?
http://www.hondata.com/s300.html
No more cutting of R2 and R3 required?
Re: SManager V2.0.0 (beta)
Posted: Tue Feb 28, 2012 12:00 pm
by Spunkster
The new analog inputs are for datalogging only and cannot be used to run in closed loop.
Re: SManager V2.0.0 (beta)
Posted: Tue Feb 28, 2012 9:13 pm
by Johnny_9
Spunkster wrote:The new analog inputs are for datalogging only and cannot be used to run in closed loop.
Thanks. in th excitement, missed that crucial info
does the cable shown in the pic coms as a standard?
Re: SManager V2.0.0 (beta)
Posted: Wed Feb 29, 2012 10:39 am
by Spunkster
It comes with the new V2 s300 boards.
Re: SManager V2.0.0 (beta)
Posted: Sun Mar 04, 2012 6:44 am
by Johnny_9
Spunkster wrote:The new analog inputs are for datalogging only and cannot be used to run in closed loop.
please consider enable feedback loops on these digital / analogue inputs
knock - add fuel//retard
egt vs afr correction
Re: SManager V2.0.0 (beta)
Posted: Tue Mar 06, 2012 8:41 pm
by FreshDA9
so i updated and when i open old logs i get an issue with it not finding the wideband af input for some reason. so i can playback any old logs with the AF? can post screen shots if need be. might have to revert back since i have a tune scheduled this week.