Page 2 of 2
Posted: Tue Sep 22, 2009 8:12 am
by D@nCeR
another side note is that i dont have access to a dyno.. so this is gonna have to be street mapped as much as possible..
Posted: Tue Sep 22, 2009 8:56 am
by keto06
Sorry man.
Posted: Tue Sep 22, 2009 10:21 am
by D@nCeR
keto06 wrote:Sorry man.
For what mate?
Posted: Tue Sep 22, 2009 12:42 pm
by keto06
That I couldnt be more of help. I think if you do 1 datalog and put lean protection on, you probably can do 1 datalog with no worries....
Re: K20a Toda A3 Cams Base Map Needed Please
Posted: Thu Sep 24, 2009 12:46 pm
by rikitaun
D@nCeR wrote:Hey Guys
Mods List:
Gruppe M
Hondata KPRO
Toda A3 Camshafts
Toda 4-2-1 Manifold
RBC Inlet Manifold
Standard Injectors
see the duty cicle on your logs.... with this mods and standard injector, wrong ... more of 80%
I have the same mods and need 440cc injectors ;)
What is your Kpro ?? PRA or PRb ??
Open standard kal of kamanger (pra or prb)
dynotuned and ajust VTC degrees:
Low cam. 40º from 2500 to end
highcam.
3000-5250 50º
5500-5800 45º
6000-7000 40º
7400 35º
7700-8000 30º
8500 27º
8800- final 25º
rev.limit 8800rpm