s300 doesn't like

airshifter · Post by **airshifter** » Fri Aug 12, 2005 12:21 am

realtime updates while being connected to the ecu(datalogging)

some helpful info for others

makes the car do strange things, once I turned that off realtime seems to be working well

ALSO I couldn't get it to work at all in a vtec converted PO6 but it works fine in a P28. Going to resocket the PO6 and try it with chip and see what happens

That is going to be fun(Removing male pins)

LOTS OF FUN TO COME with S300

Post by **Spunkster** » Fri Aug 12, 2005 9:26 am

Do you have J12 cut on both ecu's? I have seen no probelms with real time update while datalogging. If you are changing a value, try tabing out of that field and the new value will be initialized in the ecu.

airshifter · Post by **airshifter** » Fri Aug 12, 2005 2:49 pm

j12 is cut on both ecu's

something I did notice is the green light flashes between red and green while datalogging and is solid green when not

Silverbeast · Post by **Silverbeast** » Fri Aug 12, 2005 9:00 pm

I have had no problems doing both at the same time either.

airshifter · Post by **airshifter** » Thu Aug 25, 2005 12:30 pm

my problem is fixed now

guess i had a bad one

sent it back with ecu and got ecu back with a new s300