Missing Hondata System...

Hondata installation questions / answers / issues.
Locked
turbo_civic_si
Posts: 47
Joined: Thu Sep 04, 2003 5:06 pm

Missing Hondata System...

Post by turbo_civic_si »

S/N: S200-0468

Been missing for around 2-3 months. little late to post, but doesn't mean i haven't looked for it nor that it can't be found. was bought in 2003 as an upgrade from an S100.

Has Boost & Datalog. Does not have 3 Step or G-Sensor.

Was removed out of blue box and semi-custom mounted inside a full frame USDM P28 ecu. Ecu frame is cut for the datalog cable to fit on the outside part of the ecu. ECU has a 6 position terminal block that is green, has one leg cut to fit the 5 holes. Terminal Block Pic ----> http://rocky.digikey.com/WebLib/Phoenix ... 725698.jpg

I'm located in houston, tx. i do not know if it was sold or if it was kept. i have someone i suspect, but would like to see if someone has it out there and where it came from to trace it back to who i suspect took it. Any info, please email me. Thanks.

esaenz4@stx.rr.com
Locked