Looking for custom calibration

[Mr Plow]

I have a fully forged built A2 bottom end with 8.5:1 compression and an A3 head and a t3/t4 turbo in a 2004 Civic Si with an A3 ecu. I've tried several of the preset calibrations and can not get the car to start on any of them.I get 0 duty cycle even at 100% cranking fuel. I also can't get the tune to read my 550cc injectors. I have it set at 320 I believe with 35% cranking fuel now on my current tune. Send me some advice on what I should be doing. Or if you have a hybrid calibration that would work please post it up. Thanks!!

[SiK LiL pLaYa]

I have a fully forged built A2 bottom end with 8.5:1 compression and an A3 head and a t3/t4 turbo in a 2004 Civic Si with an A3 ecu. I've tried several of the preset calibrations and can not get the car to start on any of them.I get 0 duty cycle even at 100% cranking fuel. I also can't get the tune to read my 550cc injectors. I have it set at 320 I believe with 35% cranking fuel now on my current tune. Send me some advice on what I should be doing. Or if you have a hybrid calibration that would work please post it up. Thanks!!

If you have not already post this up on clubrsx. Might be able to get some help out of it.