Hi all,
Just got the Crower stg 2 cams installed and fired up with Hondata supplied map. My is a JDM with DCRH and V2. I lowered the ignition timing slightly due to high comp. Fuel map, vtec point 4900 - 5500 as per supplied.
When I hit vtec, the car jerked like got choked for 1-2 seconds and then high cam kicked in. Then it's ok from there but same problem in every gear at vtec points. Btw, the AF is kind of rich avg 11.5
I adjust vtec point to 5800 above... the car runs smoothly. Why it can't run with lower vtec, is it due to the cams or tuning?
Please advise.
Thanks!