Error code 15 Ignition output

s300 and SManager software questions & answers
300whpcrx
Posts: 11
Joined: Fri Oct 06, 2017 5:40 am

Re: Error code 15 Ignition output

Post by 300whpcrx »

Spunkster wrote: Tue Oct 10, 2017 4:11 pm look at the sticker that should be on the gray plug that can be seen with the lid off.
I can see a spot where adhesive once was but no sticker. ;(
300whpcrx
Posts: 11
Joined: Fri Oct 06, 2017 5:40 am

Re: Error code 15 Ignition output

Post by 300whpcrx »

Here is a pic of the inside.
You do not have the required permissions to view the files attached to this post.
User avatar
Spunkster
Site Admin
Posts: 23884
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Error code 15 Ignition output

Post by Spunkster »

You really need to try this ECU in a known working vehicle. This will help you determine if it is related to your vehicle or if it is the ECU.
300whpcrx
Posts: 11
Joined: Fri Oct 06, 2017 5:40 am

Re: Error code 15 Ignition output

Post by 300whpcrx »

I wish I knew another person in the state with an integra.
User avatar
Spunkster
Site Admin
Posts: 23884
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Error code 15 Ignition output

Post by Spunkster »

Try searching local forums, Facebook or any performance shops in your area. They should be able to help you find someone locally to test this with.
terryburns
Posts: 7
Joined: Sat Mar 30, 2019 7:32 am

Re: Error code 15 Ignition output

Post by terryburns »

I am having this same issue on my crx. Car does not start at all. It’s running a p06 and all work on it was done by humble performance. It just throws error 15 in hondata. I changed out switch and still the same results. HELP!
User avatar
Spunkster
Site Admin
Posts: 23884
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Error code 15 Ignition output

Post by Spunkster »

Have you discussed this issue with Humble performance?
Post Reply